23.12.2011 CDMA Huawei C3500 Supported
Resurrecting Huawei C3500 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x00EC/0x257E
To resurrect Huawei C3500:
- Solder JTAG cable to Huawei C3500 JTAG pads;
- Insert USB Data cable into board and PC;
- Make sure Huawei C3500 is selected in the list of models;
- Click Resurrect button;
- Choose which areas to flash;
- Wait till software signals a successful operation completion;
- De-solder JTAG wires;
_
