JTAG Manger 1.13
– Added feature to display FLASH chip capacity information
– Added feature ‘Auto FullFlash size’ to DCC Read/Write page for simplified Full Images reading/writting
– Fixed DCC Loader Settings dialog
– Added resurrector interface function ‘GetChipSize’ which now enables resurrector DLL to receive target’s memory size
for proper data selection for flashing (like in Huawei Modem E1550 64/128MB versions)
Firmware 1.13
– fixed ARM9 core debug capabilities when core is in Thumb mode
(when ARM9 core was entering debug from Thumb state some CPSR register’s flags were lost, same was when core was leaving debug into Thumb mode);
– FFFFFFEE instruction was added into HAS scripts processing module;
Click “Check for Updates” button to download new JTAG Manager and JTAG firmware.
HTC Magic32 – SAPP300 – G2 unbrick/repair IMEI supported
– Now resurrector accepts both Sapphire100 (0x301700E1) and Sapphire300 (0x201700E1) IDs
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“HTC_Magic32A.dll” contains pinout, repair instructions and required repair files for both “Sapphire100? and “Sapphire300? HTC Magic32A G2 phones.
HUawei E1550 broadband modem unbrick/repair updated
– Now resurrector contains both 64MB and 128MB repair firmware data And deletrmines 64 or 128MB modem version automatically – thus it flashes valid firmware.
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Huawei_E1550.dll” contains pinout, repair instructions and required repair files for Huawei E1550 broadband modem unbrick/repair.
Samsung z240 Unbrick/Repair dead boot supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_Z240.dll” contains pinout, repair instructions and required repair files for Samsung Z240 phone.
http://www.jtagbox.com
