Cyclone Box Installer v1.10
What’s new?
– First in the world – Infineon XGold IMEI Backup/Restore added
– New BB5 FBUS/USB Loaders v10.34.1 introduced
– BB5 USB Flashing module rewritten, supports new Flashing Type: FUR USB – using FBUS loaders on USB. Is possible now to do also RPL write, Cert’s read/write/erase, using just USB cable. Full FBUS protocol emulation over USB supported!
– FBUS2USB RAPU Support
– FBUS2USB RAP4 Support
– FBUS2USB Broadcomm Support
– Broadcomm platform flashing added (Nokia X2,….)
– 6700,E52 and other RAPunistore Booting fixed (Wrong First Char Received)
– SL3 Simlock RPL Write Introduced
– DCT4/BB5 Flash TurboCache added, increasing flashing speed a bit
– The Profile Bits is now analyzed before SL3 Unlock (it will not submit job if phone have blocked NCK unlocking – i.e. Telcel Mexico units)
– New NCK unlocking method for SL2 phones introduced (with latest MCU SW versions)
– Added Autologging (operation logs are stored in StoredFiles)
– Added USB Full RPL Backup (NPC,CCC,HWC,Simlock,WMDRM,etc)
– Added StatusBar in Nokia Tool, displaying current Task/Mobile attached
– DCC Camera Repair added for module NI00BC0000030102F201
– DCC Camera Repair added for module ISL3TI0200000C000002
– DCC Camera Repair added for module IS00TI0200000C208A03
– DCC Camera Repair added for module IS00TI02000001022B04
– DCC Camera Repair added for module 86000300010401022B04
– DCC Camera Repair added for module 8600030001040C208A03
– DCC Camera Repair added for module 86L10300010406260004
– DCC Camera Repair added for module 86L10300010406260000
– DCC Camera Repair added for module 86L103000104094C1003
– Refactorized GUI thread problems
– Improved stability of Blackberry calculator
– Improved flashing speed with Skins Enabled
– Added detailed Action Statusbar
– Added CBUS StatusBar, indicates “—->” on USB Transmit, “<—-" on USB Receive, Idle and Errors
– Support area is rebuilt – file list parsing is optimized
– “Connection Closed Gracefully” in Support Area fixed
– Connection recovery in SupportArea added
– Fixed “Floating Point Divison by zero” in Support Area
– Entered NCK codes are now backed-up too upon Simlock Backup
– New progressbar introduced in Nokia Tool gui
– Improved USB SwitchToRaw
– Improved ADL Server Pooling
– Improved USB Phone Pooling
– USB BootRom detect routine rebuilt
– Fixed “Access Violation” while application exit
– Fixed Registration Tool bug when “Submit” button is not shown after Box Prepare
– Fixed bug when software after minimizing to tray don’t appears at taskbar
– Added “KB Left”, “Time Left”, “Current Speed” real-time information while downloading files from support
– The Germany Server is now default Support Server
– Added support for Box HW Revisions B, thus is A11F, B110, B111 and B112, and other B11x
– Old “INI” File Parser Module added (for Old DCT4 phones)
– Old “INI” File parser Module added (for Old BB5 phones)
– Added support for 6630,6680,N70 ini parser (DPConverted v1-v2 VPL files)
– The product name is now resolved at Product List (i.e. RM-1 (6630))
– Auto-select flashfiles added (selects product and variants on Read Phone)
– The new method of BB5 NCK Calculation is now the default Unlock Method for BB5 mobiles. For SL3 use SL3 Online Code Calculation.
– “Abort” button added, this terminating all threads (during flash, erase, unlock, whatever)
– Skin Manager updated to v7.02, much stable and faster
– Fixed box hangup problem when PC goes to sleep mode
– During SL3 Check/Submit job, phone is readen first, then server transaction starts (to not overload server resources)
– Failed to Process Initial Challenge (2) during Bootloader Upgrade fixed
– During SL3 Submit Job software now try first to read PM 120 and detect if phone is SL3
– Small changes regarding SL3 Submit Job – should work bit smoother right now with bad cables
– Updated message about SL3 Credit consumption
– Added bigger delay between entering NCK codes (bruteforce protection)
– Fixed “Canvas does not allow drawing” while SL3 Manual Mode
– Cyclone Secure Bootloader v2.13 Released
– Cyclone Main Firmware v01.49 Released
– Cyclone Calculator v1.00 added into installer
– Cyclone USB Drivers Updated to 1.0.0.5
– Connectivity Cable drivers updated to 7.1.34.0
– Minor changes and bugfixes
How to update?
1. Uninstall old installer
2. Download new installer
3. Install it
4. Upgrade box firmware
5. Enjoy
Where from download?
http://www.karwos.hk/CycloneBoxInstaller.exe
