28.10.2011   CDMA ZTE R518 supported

Resurrecting ZTE R518 is easy. Battery is not required. To power the board it’s most convenient to use an USB Data Cable

To resurrect ZTE R518:

  •  Solder JTAG cable to ZTE R518 JTAG pads;
  •  Make sure ZTE R518 is selected in the list of models;
  •  Connect USB Data Cable;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;