Application designed for Martech Clip, allows to service radios based on MC9S12xx processors.

Available functions:
– reading details about radio (part, serial number)
– reading original radio code

Whole operation takes seconds and runs directly on Clip (no need to use PC computer)
Currently supported models:
– Skoda Stream (all versions) and Dance
– VW RCD300 (all versions)
– Ford by Sony (ex. CD132, C307, CD340 – units from so called V and M series)
– Chrysler (P05064362AA, P0509165AB)
MC9S12xx Flasher V1.0
It covers:
MC9s12A128
MC9s12B128
MC9s12D64, MC9s12DG128, MC9s12DG256, MC9s12DP512, MC9s12DG128
MC9s12H128, MC9s12H256, MC9s12HZ128, MC9s12HZ256, MC9s12HZ64
MC9s12XD256, MC9s12XD64, MC9s12XDG128, MC9s12XDP384
MC9s12XDP512, MC9s12XHZ256, MC9s12XHZ512

For now supported is reading eeprom, we will update for writing, also different flash sizes.
How to connect ? (it’s in tool build in also) 4 wires:
PORT1.4 – BKGD
PORT1.5 – RESET
PORT2.1 – Vdd (+5V)
PORT2.7 – Vss (GND)

We advise to connect external CLIP power supply instead of USB cable.